Dry Matter Accumulation in Maize in Response to Film Mulching and Plant Density in Northeast China.

Film mulching in combination with high plant density (PD) is a common agronomic technique in rainfed maize (Zea mays L.) production. However, the effects of combining colored plastic film mulching and PD on dry matter accumulation (DMA) dynamics and yield of spring maize have not been thoroughly elucidated to date. Thus, a 2-year field experiment was conducted with three mulching treatments (no mulching (M0), transparent plastic film mulching (M1), and black plastic film mulching (M2)) and five plant densities (60,000 (D1), 67,500 (D2), 75,000 (D3), 82,500 (D4), and 90,000 plants ha-1 (D5)). A logistic equation was used to simulate the DMA process of spring maize by taking the effective accumulated air temperature compensated by effective accumulated soil temperature as the independent variable. The results showed that compared with M0 treatment, the growth period of M1 and M2 treatments was preceded by 10 and 4 days in 2016, and 10 and 7 days in 2017, respectively. The corrected logistic equation performed well in the characterization of maize DMA process with its characteristic parameter (final DMA, a; maximum growth rate of DMA, GRmax; effective accumulated temperature under maximum growth rate of DMA, xinf; effective accumulated temperature when maize stops growing, xmax; effective accumulated temperature when maize enters the fast-growing period, x1). Plastic film color mainly affected DMA by influencing xinf. PD mainly affected DMA by affecting GRmax and x1. During the first slow growing period, the DMA of M1 treatment was the largest among the three mulching treatments, however, during the fast growing period, the DMA of M2 treatment accelerated and exceeded that of M1 treatment, resulting in the largest final DMA(a) and yield. When the PD was increased from D1 to D4, the maximum growth rate (GRmax) continued to increase, and the effective accumulated temperature when maize enters the fast growing period (x1) continued to decrease, which substantially increased the final DMA(a) and yield. The application of M2D4 treatment can harmonize the relevant factors to improve the DMA and yield of spring maize in rainfed regions of Northeast China.

Mulched drip irrigation and biochar application reduce gaseous nitrogen emissions, but increase nitrogen uptake and peanut yield.

Nitrous oxide and ammonia emissions from farmland need to be abated as they directly or indirectly affect climate warming and crop yield. We conducted a two-year field experiment to investigate the effect of biochar applied at two rates (no biochar application vs. biochar applied at 10 t ha-1) on gaseous nitrogen (N) losses (N2O emissions and NH3 volatilization), plant N uptake, residual soil mineral N, and peanut (Arachis hypogaea L.) yield under three irrigation regimes: furrow irrigation (FI), drip irrigation (DI), and mulched drip irrigation (MDI). We found that MDI reduced residual (post-harvest) soil mineral N, cumulative N2O emissions, and yield-scaled N2O emissions as compared to FI. Biochar application increased residual soil NO3--N and decreased yield-scaled N2O emissions as compared with the control without biochar application. Under the three irrigation regimes, biochar application decreased cumulative NH3 volatilization and increased plant N uptake and yield compared with the control. Biochar application improved the sustainability of peanut production and could be used to alleviate the environmental damage associated with gaseous N emissions. Where possible, biochar application under MDI in peanut fields is recommended as a management strategy to minimize gaseous N losses.

Photosynthesis, Chlorophyll Fluorescence, and Yield of Peanut in Response to Biochar Application.

The effect of biochar application on photosynthetic traits and yield in peanut (Arachis hypogaea L.) is not well understood. A 2-year field experiment was conducted in Northwest Liaoning, China to evaluate the effect of biochar application [0, 10, 20, and 40 t ha-1 (B0, B10, B20, and B40)] on leaf gas exchange parameters, chlorophyll fluorescence parameters, and yield of peanut. B10 improved photochemical quenching at flowering and pod set and reduced non-photochemical quenching at pod set, relative to B0. B10 and B20 increased actual photochemical efficiency and decreased regulated energy dissipated at pod set, relative to B0. B10 significantly increased net photosynthetic rate, transpiration rate, stomatal conductance, and water use efficiency at flowering and pod set, relative to B0. Compared with B0, B10 significantly improved peanut yield (14.6 and 13.7%) and kernel yield (20.2 and 14.4%). Biochar application increased leaf nitrogen content. B10 and B20 significantly increased plant nitrogen accumulation, as compared to B0. The net photosynthetic rate of peanut leaves had a linear correlation with plant nitrogen accumulation and peanut yield. The application of 10 t ha-1 biochar produced the highest peanut yield by enhancing leaf photosynthetic capacity, and is thus a promising strategy for peanut production in Northwest Liaoning, China.

[Optimization of mulched drip irrigation amount for peanut based on AHC model in northwestern Liaoning, China]. / 基于AHC模型的辽西北花生膜下滴灌灌水量优化.

To evaluate the applicability of AHC (agro-hydrological chemical and crop systems simulator) model and explore the suitable irrigation amount for peanut (Arachis hypogaea) under mulched drip irrigation in the semi-arid areas of northwestern Liaoning Province, based on the two-year field experimental data of peanut in 2016 and 2017, the model parameters were firstly chosen for global sensitivity analysis. Then, module parameters of soil moisture and crop growth were calibrated and validated. Finally, AHC model was used to analyze the responses of peanut yield and water use efficiency (WUE) to different irrigation amounts. The results showed that the two extremely sensitive parameters of the model were saturated hydraulic conductivity in the first and second layers of soil. Root mean square error (RMSE) and mean relative error (MRE) between simulated and measured values of soil water content ranged from 0.02 to 0.03 cm3·cm-3 and 1.5% to 2.3%, respectively. The RMSE and MRE of leaf area index and plant height were 0.3-0.6, 4.2-4.5 cm, and 5.0%-8.9%, 5.2%-6.8%, respectively. The MRE of peanut yield and water consumption were both within 5%, indicating that the model was suitable for simulating soil moisture and peanut growth in the northwest Liaoning Province. With the increases of irrigation amounts, peanut yield increased and water use efficiency decreased. Considering both peanut yield and WUE, we recommend that the optimal mulched drip irrigation amounts for peanut in the semi-arid areas of Northwestern Liaoning in test year (normal year) was 80-97 mm.

Quantitative analysis of acid-catalyzed levulinic acid product mixture from cellulose by mixed-mode liquid chromatography.

A mixed-mode weak anion-exchange/reversed-phase liquid chromatography (LC) column was successfully applied for the analysis of levulinic acid (4-oxopentanoic acid, LA) product mixture derived from cellulose. Due to the existence of ionic and neutral byproducts, the analysis of the product mixture usually requires ion chromatography, LC and gas chromatography simultaneously. The new method enables accomplishment of the analysis in one LC run within 6min. LC mobile phase of 10mM phosphate buffer containing 5% acetonitrile with pH=5.5 was used. The linear regression coefficients for the UV signal of standard compounds with the corresponding mass concentrations were greater than 0.999. The method recoveries were between 98.57-103.48%. The limits of quantification were 5, 10,1000, 1500 and 3000ng/mL for 5-hydroxymethylfurfural, furfural, acetic acid, formic acid and LA respectively. The mixed-mode column exhibits comprehensive separation mechanism of both reversed-phase and ion-exchange interactions. The mobile phase with different pH, organic modifier solvent and buffer concentration provided flexible LC method for the sample with different complexity.

Decarboxylation of Lactones over Zn/ZSM-5: Elucidation of the Structure of the Active Site and Molecular Interactions.

Herein, we report the catalytic decarboxylation of γ-valerolactone (GVL) over Zn/ZSM-5 to butene, followed by aromatization at high yield with co-feeding of water. An evaluation of the catalytic performance after prolonged periods of time showed that a water molecule is essential to maintain the decarboxylation and aromatization activities and avoid rapid catalyst deactivation. Synchrotron X-ray powder diffraction and Rietveld refinement were then used to elucidate the structures of adsorbed GVL and immobilized Zn species in combination with EXAFS and NMR spectroscopy. A new route for the cooperative hydrolysis of GVL by framework Zn-OH and Brønsted acidic sites to butene and then to aromatic compounds has thus been demonstrated. The structures and fundamental pathways for the nucleophilic attack of terminal Zn-OH sites are comparable to those of Zn-containing enzymes in biological systems.

Continuous hydrogenation of ethyl levulinate to γ-valerolactone and 2-methyl tetrahydrofuran over alumina doped Cu/SiO2 catalyst: the potential of commercialization.

Hydrogenation of levulinic acid (LA) and its esters to produce γ-valerolactone (GVL) and 2-methyl tetrahydrofuran (2-MTHF) is a key step for the utilization of cellulose derived LA. Aiming to develop a commercially feasible base metal catalyst for the production of GVL from LA, with satisfactory activity, selectivity, and stability, Al2O3 doped Cu/SiO2 and Cu/SiO2 catalysts were fabricated by co-precipitation routes in parallel. The diverse physio-chemical properties of these two catalysts were characterized by XRD, TEM, dissociative N2O chemisorptions, and Py-IR methods. The catalytic properties of these two catalysts were systematically assessed in the continuous hydrogenation of ethyl levulinate (EL) in a fixed-bed reactor. The effect of acidic property of the SiO2 substrate on the catalytic properties was investigated. To justify the potential of its commercialization, significant attention was paid on the initial activity, proper operation window, by-products control, selectivity, and stability of the catalyst. The effect of reaction conditions, such as temperature and pressure, on the performance of the catalyst was also thoroughly studied. The development of alumina doped Cu/SiO2 catalyst strengthened the value-chain from cellulose to industrially important chemicals via LA and GVL.

Elucidation of Adsorbate Structures and Interactions on Brønsted Acid Sites in H-ZSM-5 by Synchrotron X-ray Powder Diffraction.

Microporous H-ZSM-5 containing one Brønsted acid site per asymmetric unit is deliberately chosen to host pyridine, methanol, and ammonia as guest molecules. By using new-generation in situ synchrotron X-ray powder diffraction combined with Rietveld refinement, the slight but significant alteration in scattering parameters of framework atoms modified by the guest molecules enables the user to elucidate their adsorption geometries and interactions with the Brønsted acid sites in H-ZSM-5 in terms of atomic distances and angles within experimental errors. The conclusion, although demonstrated in the H-ZSM-5, is expected to be transferable to other zeolites. This approach provides a stepping stone towards the rational engineering of molecular interaction(s) with acid sites in zeolitic catalysis.